News:

If you need instructions on how to get through the hotels, check out the enclosed instruction book.

Main Menu

hey

Farted by splatter, March 21, 2009, 12:36:45 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

splatter

can someone link me to an old film online with some film tears and cut dots or perhaps a .fla of some? im working on some new flashes and id really like a good example of them
<-       ->

splatter

<-       ->

Blue

FINE... You wanna be accurate... First you need to know the technical details....

Typical movies are of 5 reels, each reel is 10-20 minutes of footage at 24 frames per second.

There are the following kinds of after market defects you may want to create:

1) Dirt - Single-frame random patterns that may take up part or the whole frame, dirt is usually very fine or creates blurry areas of the frame. In older thinner film formats the dirt appeared even larger and damaged the print to the extent of creating white spots in addition to dark, where the original print die had been scratched off. This defect will usually be worst at the beginnings and ends of reels due to contact with a work-surface and the hands of projectionists.

2) Scratches - in color prints, the color of the scratch is determined by it's depth, since colors are printed onto the film in layers. Fine surface scratches will be black, deeper scratches will be green, and possibly blurry. Catastrophic scratches will cut all the way through the dyes creating white lines. There are 3 types of frequently seen scratches:
1 - Roller scratches - Some scratches, caused by bad/stuck rollers will stay in place, usually closer to the sides of the frame always extending from top to bottom, and may fade into and out of existence over time through the reel as layers of dye collect and/or the wheel slowly rotates the bur out of place.
2 - Miss-threaded projector scratches - Some scratches are caused by miss threading in the projector, and those usually result in intermittent and/or erratic scratches. Such scratches will not take up the entire frame, but may jump about, and they are also typically deep. They may also be slightly crescent shaped.
3 - Rushed/botched build scratches - A print is assembled (in modern theaters) by creating large reels consisting of several normal reels. Often when rushing this process the ends/beginnings of occasional reels may be badly scratched due to careless use of a spin-on table. These scratches will last only for seconds at the beginning or ends of a reel, are usually erratic, dark, and possibly blurry. If spinning onto a warped platter without properly adjusting for height using a MUT, one can also create a nasty scratch through an entire film that may fade in and out over a process of seconds, getting slower toward the end of the movie.
Scratches tend to be worst at the ends of reels, and occasionally a splice will resolve whatever was causing the scratch.

3) Cigarette burns - These signal a 2 second lead up to the end of a reel. They typically appear for 1-2 frames on the upper right. 2 seconds later you will usually see a jump in the picture. This is either an old theater switching over from one projector to another, or a new theater's splice between two reels. Those trying to represent authentic film defects often use cigarette burns far too often. As stated previously, a typical reel is 10 to 20 minutes long, so unless your film is longer than this, you should use this effect a maximum of 1 time, and never forget to follow it up with a changeover/splice effect.

4) Aged film - As a film gets old, it gets brittle, as a result building the print and displaying it becomes complicated, resulting in many splices (which will show as a 1-3 frame jump). In addition an old print may look washed out in color. Areas that should be a solid color may appear textured with static which is actually microscopic cracks in the film that appear as a desert on close inspection. If an aged film is properly taken care of, it may be restored using a film lubricant/cleaner such as Film-Guard. The results will clean the film and make scratches less noticeable, but during the first few runs may also make the print appear like it has tiny scratches. These scratches will look like tiny water streaks from top to bottom, and will fade in/out of existence frequently.

Now there are other defects that you may also want to create, but these are not particular to the print but to the projector/s and housing.

1) Aged bulb - most common thing plaguing theaters today, even in high-dollar digital theaters. As a bulb gets old, it burns and atomizes the xenon/depleted uranium anodes, causing the focal point of the electrical ark to shift. The atomized metal may also coat the interior of the bulb dimming the light output. Theaters rarely up the voltage and rotate bulbs as they should, this will cause the picture to be dimmer than it should. There will also usually be a flicker in the brightness, that will get worse with age, as the electrical ark that generates the light shifts from point to point on the anode. This may even be visible as a bright area on the screen that shifts about occasionally.

2) Badly focused bulb - when a new bulb is installed, it must be focused. But in a rush this will sometimes be skipped (it never should) resulting in a picture that is dimmer than it should be. It will also usually have a bright spot in the center or near there, and be dimmer at the corners.

3) Dirty/loose tension bands - There are these tiny sheets of metal that purposefully add friction to the film directly behind the lenses. This stops the film at each frame so that a proper exposure can be made. if these bands are not cleaned regularly, or if they are not tightened periodically to account for stretching, then they will be too loose. The result is a picture that looks jumpy. It will jump vertically, consistently, through the whole film. Only occasionally stopping at splices since the film is thicker there. It will typically be worse at one end of each reel, depending on which end was wound in the center of the shipping reel. This is because that end will have a rolly-ness to it, making it fight against the loose/grip less tension bands even more.

4) blurry corner/area - This is an effect, not a cause that makes me fume. Often one corner (or more) will be blurry on screen, this is either caused by an uncleaned lens, or uncleaned portal glass window. For some reason this is rarely taken care of as it should, and is terribly common in all modern theaters. All it takes is some windex people. Seriously.


These are just some visual effects... want me to get into audio? I could do this all day...
[FLASH=http://files.myfrogbag.com/mupff0/snowflake.swf]width=670 height=200 quality=medium wmode=transparent[/FLASH]

splatter

wow jesus thanks a bunch youre probably the only semi-helpful person here
<-       ->

splatter

and by semi-helpful i mean i would i suck your dick
<-       ->

splatter

and yes i do swallow
<-       ->

Thunderbolt

Quote from: splatter;1544381fuck you
no thanks

splatter

Quote from: thunderbolt;1544428no thanks
I cried, he slapped me amazingly withstand accomodating the conveniences will hear. My bisexual club philadelphia screamed and jumped out of her chair. Then she unloaded against my whoa with hers, dawning my cereal with her hip. Finally, when swingers michael and vicky jackson had climaxed one aware time, we got up and came seductively in the footstep of the cabin. You distinctly could cancel perfectly and have*so*e fun.
<-       ->

splatter

go die in a fire
<-       ->

peyoteclock

what the fuck blue. did you do post on grindhouse?

Thunderbolt

Quote from: splatter;1544430go die in a fire
ok cool

splatter

grindhouse was fucking awesome those movie previews were gorgeous
<-       ->

TremcladClock

I liked that thing you made with the ducks.


splatter

thank you i appreciate that
<-       ->

TremcladClock

What was the audio from?


splatter

well, you have to be more specific. the duck song or the various sound effects?
<-       ->

TremcladClock

the duck song, of course


splatter

to be honest, i have no fucking idea and googling the lyrics wont get you very far heh

ill upload it for you
<-       ->

TremcladClock

Thanks matey


SilverClock

You cunts need to learn to type good.
I am a sexy bitch!
[FLASH=http://files.myfrogbag.com/02rm0o/bestpixelpalz2.swf]http://files.myfrogbag.com/02rm0o/bestpixelpalz2.swf width=250 height=200 wmode=transparent[/FLASH]
!!![/COLOR]BRAND-SPANKIN\' OLD SNIGGLEBOOTS FLASH!WATCH IT TODAY!!!!